LDS/Medical Tests/Bacterial Culture Identification Panel by MALDI-TOF Technology

Bacterial Culture Identification Panel by MALDI-TOF Technology

Traditional methods used to identify bacterial isolates include gram stain morphology, biochemical tests, DNA probes, sequencing and liquid/gas chromatography. In recent years, matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry (MS) has been rapidly implemented in clinical laboratories as an easy, safe, and cost-effective method for bacterial identification.

Matrix-assisted laser desorption ionization (MALDI) uses a laser energy absorbing matrix, usually α-cyano-5-hydroxycinnamic acid, to ionize microbial molecules (e.g. ribosome proteins). Ionized molecules are accelerated based on their mass to charge ratio. The time for ionized molecules to reach the detector is measured, and combined with mass to charge information, generates a mass spectra which is unique to each organism. This mass spectra is then compared to a reference database which contains spectra of a large collection of different species and strains. A score is provided based on the relatedness to the spectra of known species. This score serves as a confidence value in identification and also determines whether a species can be identified at family, genus or species level. For different MALDI-TOF systems, the scoring algorithm, as well as the proprietary bacterial reference database are different. Currently there are two FDA-cleared systems VITEK® MS (bioMérieux Inc.) and the MALDI Biotyper CA System (Bruker Daltonics Inc.) They are both limited to gram negative bacteria identification for diagnostic uses but RUO reagents and libraries are available for a much larger group of bacterial species.

Pure culture is the best specimen for identification with MALDI-TOF. It is the method of choice for anaerobic bacteria due to the unavailability for other identification methods in many labs. Samples of pure colonies can either be plated directly on the target plate or go through a preparatory protein extraction process. Direct plating is easy and inexpensive and works for most aerobic and anaerobic bacteria. Protein extraction is usually needed for some species like mycobacteria and fungi to kill and lyse the cell.

Direct testing of clinical specimens is usually not satisfactory due to relative high limit of detection (LoD) of the MALDI-TOF method, and also the increased complexity of poly-microbial infections. Blood culture tubes with positive microbial growth may be tested but require special sample processing. The primary advantage of MALDI-TOF is the speed at which bacteria can be identified. MALDI-TOF testing typically only requires a few hours after bacterial isolation in culture compared to one or more days for biochemical testing.

Although MALDI-TOF identification works at least as good as biochemical test methods for most species, it has limitations when it comes to certain bacteria. For some species, their mass spectra are so similar that they cannot be accurately differentiated. Examples include Neisseria polysaccharea and Neisseria meningitidis, Escherichia coli and Shigella, sp. Additional tests are needed for the identification of these bacterial species. Finally, MALDI-TOF can also detect the presence of microbial resistance factors and aid in the selection of antibacterial therapy.

  • Assist in the diagnosis of bacterial infections
  • Assist in treatment selection of bacterial infections
Species identified with a score above cutoff indicates successful identification of the species. Isolates not identified or that have a score lower than cutoff indicates failure of identification. This could be due to sample processing or the possibility that the species cannot be accurately identified by MALDI-TOF and will need other methods (biochemical tests, sequencing or chromatography) for identification.

Culture Negative (No pathogen isolated)

Matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry.

Viable pure culture isolate of bacteria is used for testing. Choose appropriate collection and transport device for organism to be identified (e.g. anaerobic transport tube).

Store and transport specimen at room temperature.

Standard identification, Identification by DNA probes, Identification by liquid/gas chromatography (LC/GC), Identification by sequencing, Antimicrobial susceptibility test with MIC, Gram-Negative Resistance Genes, PCR.
1-3 days.
Please log in to view content.
Create an account to get a 30-day free trial.
Login
Please log in to view content.
Create an account to get a 30-day free trial.
Login
Please log in to view content.
Create an account to get a 30-day free trial.
Login
  • Clin Chem. 2015 Jan; 61(1):100-11. [PMID: 25278500]
  • Int J Med Microbiol. 2015 Jun-Aug; 305(4-5):446-52. [PMID: 25912807]
  • J Microbiol Methods. 2015 Dec;119:1-3. [PMID: 26392293]
  • J Clin Microbiol. 2014 Jun;52(6):2270-1 [PMID: 24696027]
  • Bailey & Scott’s Diagnostic Microbiology, Mosby; 14 edition (December 21, 2016)